Пытался найти где посмотреть Вассу, на пару сайтов не пустили, впн не использую, плюнул, посмотрел 25 год. Но сейчас не об этом. В процессе поиска попался сайт Vauhti с рекомендацией именно на эту гонку в этом году. Любопытно, делюсь. Думаю и без перевода можно понять что, куда и как класть.
Date 01.03.2026 Snow type Mixed snow Air temperature (°C) -2 Weather type Snowy Distance (km) 90 Ski trail hardness - Soft
RACE
Glide 1. CLEAN & GLIDE 2. UP POLAR liquid (-5/-25) 3. TOP RACE VECTOR / RACE PINK powder (+3/-4) Instructions 1. TOP RACE VECTOR / RACE PINK powder (+3/-4) Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon. 2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon. 3. Rub on a thin layer of TOP RACE VECTOR, then apply RACE PINK powder on top and melt them together with a waxing iron (180 degrees). Let it cool, scrape, and brush out thoroughly. Start with steel to bring out the structure, then brush and polish with horsehair and nylon.
ACTIVE Glide 1. CLEAN & GLIDE 2. UP POLAR liquid (-5/-25) 3. RACE LDR WHITE solid
Instructions 1. Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon. 2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon. 3. Melt on RACE LDR WHITE paraffin (160 degrees). Scrape and then brush out thoroughly. Preferably with steel, horsehair, and finish with nylon.
GRIP 1. KS BASE liquid klister 2. GT PINK (0/-4) 3. PURE RACE NEW SNOW PINK (-1/-5)
Instructions 1. Start by roughening the kick zone and apply a thin layer of KS BASE liquid. Let it dry thoroughly. 2. Then apply two thin layers of GT PINK, cork between each layer. 3. Then apply PURE RACE NEW SNOW PINK, number of layers as needed (3–5 layers), and cork between each layer.
SKIN 1. SKIN SKI CLEANER 2. SKIN CARE RED (+10/-1)
Instructions 1. Clean the skins thoroughly with SKIN SKI CLEANER and a polishing cloth. Then let them dry completely. 2. Apply SKIN CARE RED evenly over the surface to impregnate the skins and allow the product to dry properly before use.
в который раз натыкаюсь на эту рекомендацию по их смывке +
01.03.2026 18:58
"вычистить нейлоном" - и не понимаю. Эта смывка оставляет "парафиновый" белесый слой. Но если её вычищать только нейлоном, то это, по сути, означает располировать поднятую смывкой грязь по лыже, а не убрать её с лыжи, сперва подняв сталью/медью по мокрому или сухому (эта смывка очень быстро высыхает) и затем убрав салфеткой. Что тогда будет вскрывать и удалять грязь с лыжи?
"Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon"
Почти во всех прежних рецептах , они использовали LF Polar, как базовый слой. Причем, также 50/50 жидкий/твердый.
Как они перешли на фторфри, то просто сменили LF на линейку UP.
По своему уже 5-летнему опыту могу уверенно сказать: Жидкий Полар лф и твердый Полар лф на лыже работают абсолютно одинаково. Причём , если жидкий лф оставить надолго не отполированным, месяц, например, то там образуется какой-то непонятный камень, который щеткой запаришься счищать.
Ну а расход жидкого лф в разы меньше твердого, который надо накапывать.
Предполагаю, что и с линейкой UP такая же история.
Потому, скорее всего, тут не в чистом виде маркетинг, а банальная скорость подготовки , удобство и экономия материала.
Другое дело, что в жидком парафине материала гораздо меньше в бутылке, чем в бруске, а цена близкая. И вот тут уже маркетинг ))
В процессе поиска попался сайт Vauhti с рекомендацией именно на эту гонку в этом году. Любопытно, делюсь. Думаю и без перевода можно понять что, куда и как класть.
Date 01.03.2026
Snow type Mixed snow
Air temperature (°C) -2
Weather type Snowy
Distance (km) 90
Ski trail hardness - Soft
RACE
Glide
1. CLEAN & GLIDE
2. UP POLAR liquid (-5/-25)
3. TOP RACE VECTOR / RACE PINK powder (+3/-4)
Instructions
1. TOP RACE VECTOR / RACE PINK powder (+3/-4) Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon.
2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon.
3. Rub on a thin layer of TOP RACE VECTOR, then apply RACE PINK powder on top and melt them together with a waxing iron (180 degrees). Let it cool, scrape, and brush out
thoroughly. Start with steel to bring out the structure, then brush and polish with horsehair and nylon.
ACTIVE
Glide
1. CLEAN & GLIDE
2. UP POLAR liquid (-5/-25)
3. RACE LDR WHITE solid
Instructions
1. Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon.
2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon.
3. Melt on RACE LDR WHITE paraffin (160 degrees). Scrape and then brush out thoroughly. Preferably with steel, horsehair, and finish with nylon.
GRIP
1. KS BASE liquid klister
2. GT PINK (0/-4)
3. PURE RACE NEW SNOW PINK (-1/-5)
Instructions
1. Start by roughening the kick zone and apply a thin layer of KS BASE liquid. Let it dry thoroughly.
2. Then apply two thin layers of GT PINK, cork between each layer.
3. Then apply PURE RACE NEW SNOW PINK, number of layers as needed (3–5 layers), and cork between each layer.
SKIN
1. SKIN SKI CLEANER
2. SKIN CARE RED (+10/-1)
Instructions
1. Clean the skins thoroughly with SKIN SKI CLEANER and a polishing cloth. Then let them dry completely.
2. Apply SKIN CARE RED evenly over the surface to impregnate the skins and allow the product to dry properly before use.